17 Sturdy and Stylish Workbench Top Ideas
If you are a DIY addict that loves to get your hands dirty, having a strong and durable space to work is a must. Look no further as you can find some sturdy and stylish workbench top ideas here.
1. Concrete Workbench Top Ideas
Maybe this is one of the best and sturdiest workbench top material ideas that you could imagine.
Concrete is renowned for its durability and strength, which makes it a perfect choice for any activity, from the easy daily routine like preparing the meal on a kitchen countertop to a more challenging task that entails woodworking projects.
The good thing about concrete workbench top idea is it is resistant to dent due to its super hard surface. However, it does not mean this material is flawless.
One of the most daunting drawbacks regarding concrete workbench top is it can crack. You will be likely to find a hairline fracture especially if you poured it in place instead of precasting it. The good news is you can fix it.
Another thing that you may want to take into consideration is the cost. Well, it depends on whether you have it made or DIY it, though.
Constructing a concrete workbench top entails a lot of labor, which eventually makes it cost an arm and a leg. But if you think you can create it yourself, you can have a nest egg.
2. Workbench Top Covered with Carpet
Are you looking for workbench top ideas for fragile crafts? Try carpet covering.
The smooth surface of a carpet will prevent your hardwood workbench top from getting damaged. You can either cover it completely or just half of it so that you have both soft and hard surfaces.
This kind of workbench top idea will not suitable for a busy shop. If you want a soft surface that you will occasionally use, you can just use a moving pad drape. It is easy to clean and remove compared to a carpet that is tacked down to the top.
3. Upgrade Your Workbench Top
Your workbench top can be scratched and partially damaged over time. Therefore, you may need to consider replacing or covering it.
This brilliant workbench top idea is worth a try. To conceal the scratch and dent due to prolonged exposure to a lot of labor, you can cover it with leftover scraps of laminate flooring.
The good thing about laminate is it is tough and easy to install. You just need to fasten it to the top with nails. Do not worry about the stain and mess because it is easy to clean. After a few years, you can pry it off and replace it without breaking a sweat.
4. Make It Work More
Many workbench ideas that will make your life easier, just like this one.
Let’s be honest! Do you often waste your valuable time searching for a certain tool like a sandpaper cutter when doing a project? It may seem trivial, but it is tiring if it happens over and over again.
Instead of spending your time looking for a sandpaper cutter, why don’t you just attach it to your workbench top? By doing this, you will be able to use your time more effectively and efficiently.
5. Epoxy Workbench Top
If you are looking for some stylish yet functional stuff for your garage or shop, you can try this epoxy workbench top. Not only will it be chic but also sturdy.
To make this workbench top, you need to screw some 2×4’s and sand them down with 40-grit sandpaper. Apply a coat of Cabosil Epoxy Thickener. After that, add another coat of Thermal-Chem Armorprime 726 Epoxy Primer.
Next, sand the surface again until smooth, and then apply the metallic epoxy. Let it sit for about 24 hours before you lightly sand it with 220 grit sandpaper. Do not forget to wipe it down with acetone. Now, you can set your logo down if necessary.
Once the logo is dry, apply a coat of urethane with to seal the surface with a 3/8 inch roller nap. By doing this, you will get a super glossy workbench top.
6. Industrial-Style Workbench Top
This heavy-duty workbench top idea will not only provide you a sturdy surface to work on but also add a little bit touch of rustic flair to your garage.
You can obtain this look by investing in a metal workbench top. If you think it is quite arduous and pricey, you can just make one from plywood or hardwood, and then cover it up with a metal sheet.
Covering plywood with a metal sheet will be a convenient choice. The ash gray finish will add some sort of style to space.
7. Galvanized Metal Steel Workbench Top Ideas
This is another great idea that you can apply to your existing workbench. You can top it with a galvanized metal sheet to conceal the flaws like dents, scratches, and splinters.
Moreover, the galvanized metal sheet is pretty strong, durable, and easy to install. You just need to nail it to the workbench top you already have to upgrade the look. The drawback of this material is it tends to be loud.
8. Workbench Top Ideas with Built-In Router
A router is a powerful and versatile woodworking tool that every DIY addict or carpenter should have. When using it, you have to hold it with both of your hands, which can be exhausting. To save your time and energy, try making this workbench top idea.
This workbench top features a built-in router that will help you make a wide range of cutting, trimming, and shaping tasks on a hard surface, such as plastic, wood, metal, and laminates.
9. Foldable Workbench Top
This workbench top idea is brilliant, space-saving, efficient, and inexpensive. It is made of pine, one of the softwoods that are renowned for the low price. However, the main drawback to it is its durability.
Pine is notorious for being less durable compared to hardwood. Additionally, it is quite fragile for a busy workbench top. Although you have painted or varnished it, it can still be easily dented and scored.
This material is not that bad, though. One thing for sure, you will not damage your piece of work if you drop it onto the workbench top accidentally. Besides, this one can be folded, which is a safe bet for anyone who lacks space.
10. MDF Workbench Top Ideas with Casters
If you are looking for an inexpensive material that provides a perfectly flat surface for woodworking use, MDF will be your greatest bet.
MDF (Medium Density Fiberboard) is an engineered wood product. It is the combination of wood fibers and wax that has been pressed together with high pressure and heat.
Since MDF is made of small wood fibers, it has an incredibly smooth surface, which means you can paint it easily. It does not have visible grain, which makes it perfect for any kind of furniture including workbench top if you are reluctant to deal with pattern matching.
Despite being inexpensive and easy to paint, MDF is not resistant to moisture or liquids because it can expand considerably. Since your garage or shop is not a kitchen or a bathroom that is likely to be wet, it can make a pretty good workbench top.
This workbench top is made of MDF. It is inexpensive and portable, thanks to the casters that allow you to move it from your garage to the backyard easily.
11. Oak and Maple Workbench
Nothing can beat the sturdiness and durability of hardwood. Therefore, this material may be your safe bet as it will be long-lasting. Unfortunately, it can be costly.
Some hardwoods, such as maples and oaks, are quite expensive. The good thing is they will not be damaged easily during work.
Unfortunately, not all hardwoods are suitable for a workbench top. Red oaks, for example, are prone to splinter it they are subjected to prolonged banging. Therefore, you will have to avoid them.
Before choosing the type of hardwood that you are going to use, kindly consider the humidity in the room where it will be put because it can expand and contract. To overcome this problem, you can top the hardwood with plywood of MDF.
This workbench top is made of oak and maple. These materials are well-known for their durability. Therefore, it will give you a sturdy surface to work on. It also has dog holes to make the woodworking project easier.
12. Workbench with Split Top
Before making a workspace in your garage, you had better prepare your workbench plans. Ask yourself what it will be used for.
You may want to consider making this fabulous workbench top. It features some dog holes that will be useful for your projects.
Another wonderful thing about this workbench top is it can split into half, providing you sufficient space to hold some pieces of wood, just like when you clamp them.
13. Modern Workbench Top Ideas
This workbench top is made of stainless steel. The sleek design and glossy finish add the touch of modern flair to space. It also has protruding edges that prevent your tools from falling.
14. Workbench and Table Saw Combo
This is a good workbench top idea that you can try to make. It is so spacious that you have plenty of workspaces, allowing you to do multiple tasks at the same time.
Another great thing about this workbench top is it features built-in saw, making it become a nice table saw. You can make a wide array of cuttings with this workspace. It is such a smart solution for a garage with limited space.
15. Workbench with Miter Saw
This workbench top idea is the counterpart of the aforementioned one. It features a niche in which a miter saw can fit snugly so that you can make a more precise cutting for trims.
The workbench top is made of hardwood, which is quite durable and long-lasting. It is also spacious, allowing you to work comfortably.
It is not only durable and strong but also chic, thanks to the various brown hues that you can find on the workbench top.
16. Plywood Workbench Top
Are you seeking cheap workbench top ideas that you can make at home? Give plywood a try.
Like MDF, plywood is relatively cheap, making it a good option for those who are short on budget. Besides, it is a perfect choice if the top will be flush with the frame.
The good thing about plywood is it is not affected by seasonal humidity changes. For this reason, it will not warp easily if it is not subjected to moisture in the air.
Moreover, the plywood workbench top is also pretty durable against the damage caused by the tools you use. Its durability will depend on what you use it for, though.
If you use it for woodworking stuff quite often, it may not provide a perfectly flat surface as you wish. But you can overcome this problem by adding two or more layers of ¾-inch plywood.
17. Combination of MDF and Hardwood
Although hardwood is pretty tough and can put up with many kinds of woodworking projects, it does not mean it can last forever. You may need to upgrade it by sanding it down or even replace it. However, the latter would cost an arm and a leg.
You can still get the sturdiness of hardwood without costing you a fortune by investing in workbench top covering.
There are a lot of workbench surface options you can choose from, one of which is an MDF or plywood layer that is placed to the top of the hardwood base.
This material will give you peace of mind as it is not as expensive as hardwood. If it is damaged, you can just replace it with a new one.
Those are some sturdy yet stylish workbench top ideas that are worth copying. Even more, they will jazz up your garage and shop while providing a strong surface for you to work on.